mike j

Forum Replies Created

Viewing 20 posts - 101 through 120 (of 209 total)
  • Author
    Posts
  • in reply to: Strap for Heavy Lens? #63122
    mike j
    Member

    Lowpro makes a toploader AW that’s all weather and will fit a 80-200 or 70-200 with body attached.. you can attach components to the outside of the case, I frequently carry the body with the “money maker” a 28-80 2.8 in a side pocket, as well as the G9 on the other side and a SB600 in the front.

    in reply to: Hey Rod Builders #25622
    mike j
    Member

    Yeah, my suspicion is that I’m gonna have to remove the cardboard “arbor”…

    in reply to: Your SLR And the River…how? #63110
    mike j
    Member

    Aqua Pack inside peli cases (cause peli’s tend to leak)..

    in reply to: Grey, Flat Light #63139
    mike j
    Member

    ahhhh, makes me wish I could explain the tricks performed with E-6 and push processing.

    in reply to: Hey Rod Builders #25619
    mike j
    Member

    The actual seat itself is just a ceap-o thin wall tube with a cap at the bottom (downlocking) and the standard other hardware… I’d rather not fight with removing that cardboard filler, I’m guessing it’s epoxied to the blank.. which probably means tedius cutting to remove the filler.. but.. hey.. its got lots of great memories and I’d like to make it a little nicer for my daughter.. plus at 8ft it’s an awesome spring creek rod…

    If I keep the cardboard tube (which it looks like I should).. I think I should saturate the top and bottom of tube with epoxy to ensure water resistance… I’m surprised it lasted as long as it has being cardboard.. I mean that area of the rod has been under water hundreds of times…

    in reply to: Hey Rod Builders #25618
    mike j
    Member

    Recessed cork..

    in reply to: Hey Rod Builders #25617
    mike j
    Member

    Bottom of filler and blank..

    in reply to: Hey Rod Builders #25616
    mike j
    Member

    Reel Seat Area, this is the cardboard filler…
    the reel seat was epoxied to this…

    in reply to: Hey Rod Builders #25615
    mike j
    Member

    Cork was recessed into the seat.

    in reply to: Backing #25565
    mike j
    Member

    Off the subject, but how do you like the 3.5 Radius reel.  I have a 1.5 Radius for my trout rod, but I’m seriously considering a 3.5 for an 8wt saltwater rod I’m building.  Madison River Fishing Company has last years model (pre Hard Alox I’m sure) for $99.

    I do like the reel.

    in reply to: Backing #25563
    mike j
    Member

    Thanks guys!

    in reply to: Nikon D10 #63087
    mike j
    Member

    Only gonna say one word Zach.  INTERNET

    In another 3-4 years, you won’t need FF because American Angler, Fly Fisherman and all the others will be WEB based. It’s happening in newspapers now, and even the major mags like SI are making a shift to the internet. The younger generations that are becoming or soon to be the major readers of said magazines do everything on the web. That includes reading fly fishing articles.
    Buy the gear that will work for you now, don’t worry about 5-10 years down the road. Aside from the fact that Nikon and Canon are not making camera gear that will last that long anymore, like I said above, we will all be getting our subscriptions via the internet in the near future and you won’t need 25MB files, even on HD monitors.

    I respectfully totally & completely disagree.
    in 1985 a high quality monitor (color VGA) was 640×480.

    in reply to: Nikon D10 #63082
    mike j
    Member

    Zach,

    You’ve mentioned the FF issue a few times here – what is it that has you holding out for FF?

    in reply to: Denial of Service Attack #25451
    mike j
    Member

    What exactly does someone have to gain by doing something like that?  I mean if I were to rob a bank it would be either for A: the money or B: to see if I could get away with it.  What would this person gain…just mess up the site a bit?  Isn’t it backed up anyway?  I’m confused about the motive here?  

    The motive can be to simply interrupt traffic to the site, or force the host into restarting or rebooting the server or services that may allow the attacker to execute remote code on the target machine.

    in reply to: NC Day Trip – Short Video #25420
    mike j
    Member

    Watch out for the Olympus Point and Shoot specifically the WS or SW’s.. I returned one because of bad pixels in the sensor and the second one filled with water after use in a pool… >:(

    in reply to: Gray Market Gear #63199
    mike j
    Member

    David is right, any saving will be obliterated if you need service.

    in reply to: Luggage Restrictions? #25464
    mike j
    Member

    I would caution against using printouts of TSA rules, it’s actually the airlines discression & the gate/flight crew.

    in reply to: Anybody ever fished for Jacks particularly? #25381
    mike j
    Member

    Zach, unless you are fishing flats only you might consider a intermediate sinking SW line…

    in reply to: Fly fishing for Shad? #25266
    mike j
    Member

    I’ve caught em on leech patterns and black buggers…

    in reply to: This place is about to get a lot faster… #25298
    mike j
    Member

    12Gbps up and down here….

Viewing 20 posts - 101 through 120 (of 209 total)