anonymous

Forum Replies Created

Viewing 20 posts - 2,481 through 2,500 (of 2,552 total)
  • Author
    Posts
  • in reply to: Checkup Thread #10538
    anonymous
    Member

    ๐Ÿ™‚ Nice board, keep up the good work. Lots of info and some nice chats. I notice that there is no visciousness and each persons input is respected. It’s what keeps me coming back. Thanks

    in reply to: Rod Tube Rack design? #10599
    anonymous
    Member

    ๐Ÿ™‚ There is a picture in the latest “Fly Fishing” catalog from Cabelas that shows a rod holder. You could probably add to, or modify that model.

    in reply to: Bad Casts #10444
    anonymous
    Member

    ::) Don’t you hate when that happens? The worst time for it to happen is when you are close to another angler. :-[ It’s embarassing. When you’re alone not so bad. A few cussings and you try again. You can always crazy glue your fingers to the line. ???

    in reply to: rods manufactured in asia #10443
    anonymous
    Member

    ;D Good note. got to have humour, it makes life bearable. ๐Ÿ˜‰ I did date an achondroplastic dwarf in college. Very neat lady. I might add I was nuts over her. :-* Silver Doc

    in reply to: rods manufactured in asia #10442
    anonymous
    Member

    ;D

    in reply to: rods manufactured in asia #10440
    anonymous
    Member

    Dwarfs?

    in reply to: rods manufactured in asia #10438
    anonymous
    Member

    ??? Actually, he’s a 37 y/o midget. S.D.

    in reply to: Here’s to 2006… #10424
    anonymous
    Member

    ;D My daughter graduated college and found a great job in San Diego. My wife survived 4 months of Chemo. and Radiation and is clear. I retired and can fish as much as I like. We had a great vacation in Italy to celebrate. And our daughter came home for the holidays, albeit not long enough. We are looking forward to 2006 with great expectations. Good luck to all. SilverDoc

    in reply to: Made In The U.S.A…. #10405
    anonymous
    Member

    :-[ I not sure how long “stuff” is going to be made in the U.S. I have a friend who works for a Chineses co. that sells products here ahd in Europe; he notes that in less than 8 years China will have the corner on almost every market in the world. He spends almost 6 months of the year in China, speaks Chinese and I believe one of the mosr astute judges of what’s to come. They are insatiabile, have the manpower and will continue to expand a nd grab the market for everything. I believe we did it to ourselves (manufactures, that is), and the trend is irreversable. It’s something akin to the large

    in reply to: Replacing Fly Lines? #10395
    anonymous
    Member

    ๐Ÿ˜‰ Forgot to add, that if a line develops cracks or really takes on a memory, then it’s replaced. With the prices of lines today you have to try to get alot of milage from them. S.D. ๐Ÿ˜‰

    in reply to: Replacing Fly Lines? #10394
    anonymous
    Member

    ๐Ÿ˜€ For my Steelhead and Salmon lines, I treat them after each use and have not replaced them in about 5 years. They are still in good shape. Trout lines I do replace because I like trying new lines. At most only 3 lines per year. The rest seem to last if treated with line cleaner and inspected on about a bi-monthly basis. I put most of the pressure on 3 wt. 4 wt. and 5 wt. lines. During the year I fish at least 3 to 4 times a week. I also switch line so that one doesn’t get over used. Also, I look for bargains or discontinued lines. There are some good buys out there. Silver Doc

    in reply to: (My) Scott G2 Review #10361
    anonymous
    Member

    Zach,

    Thanks for the thorough run-down — very helpful.

    in reply to: Photo Essay: Little Red River #10314
    anonymous
    Member

    Louise said “Look John, I always told you your head was so big it could block out the sun”

    in reply to: Anyone using Tungsten Putty? #10307
    anonymous
    Member

    ??? Flies Float? What are you “tasting” stream side or am I missing something. ๐Ÿ˜ฎ Silver Doc

    in reply to: Fish portraits… #60312
    anonymous
    Member

    Those are great shots! Was that taken with Digital I assume?

    in reply to: Just one lens… #60302
    anonymous
    Member

    Yea i think i m with you zack if i could only use one lens it would have to be a 50mm f1.2. i didnt specify film or digital – im not that far in the future yet. i wish i was. i could probably buy a dslr and save money on processing in the long run.

    in reply to: (My) Scott G2 Review #10359
    anonymous
    Member

    Zach,

    I was wondering if you had any comparative perspective on the G2 vs. the Winston WT.

    in reply to: Fishing in a blizzard #10296
    anonymous
    Member

    steve154, I went yesterday and the temp. was 26 and the water temp was 38. Cold at best, but here’s what I wear on cold days: socks; 2 pairs of fleece, followed by 1 pair heavy wool or “Genius gore tex. Next: underwear, 1 pair polypropelene, 2 pair fleece. and then breatheable waders. Fishing vest and a wind proof jacket. fingerless gloves. It only took an hour to thaw out my index finger yesterday. ;D For a hat, fleece of course and a neck band of fleece. I stay pretty warm with that combination. The trib. offer sounds good.

    in reply to: Model Business Corporations Blah Blah Blah #10279
    anonymous
    Member

    bd, You are right about that. After I went into medicine I realized too late after 38 years that I should have stuck with teaching. All weekends and nights would have been free to travel and fish. Now in my dotage I can do these things. Silver Doc

    in reply to: Fishing in a blizzard #10294
    anonymous
    Member

    steve154, I live in Altoona. I’ve been here on and off since’78. I have the best streams within driviving distance. In fact I was out today. Had the whole river to myself. Who else would fish in water that was 38 degrees and the ambient temp. 26. I did catch fish and it was shear agony to unhook them. While walking to the car my waders were frozen. But it was still fishing. Read Robert Frost’s “Dust of Snow” and you could apply it to fishing in the winter. Silver Doc

Viewing 20 posts - 2,481 through 2,500 (of 2,552 total)