Reflector Studio

Blog Forums Photography Reflector Studio

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • #7236
    Zach Matthews
    The Itinerant Angler

    Hey guys –

    What kind of white backdrop material is being used in product photos and fly shots?

    #61161
    anonymous
    Member

    Hi

    Zip down to your local Home Depot/Hardware Store of choice and pick up 2’x 4′

    #61162
    Zach Matthews
    The Itinerant Angler

    Perfect Will.

    #61163
    Avatar photoBen Cochran
    Member

    Zach, some good quality poster board will work fine as well. Do the same technique as mentioned with plenty of defused light.. You can then adjust the white through the colour select tool.. You already know about white balance so, I left that out… Couple of examples

    #61164
    Avatar photoBen Cochran
    Member

    and another

    #61165
    Zach Matthews
    The Itinerant Angler

    Those all look very good but I have to give the prize to Will.

    #61166
    anonymous
    Member

    Hi

    The panels fit T-Bar suspended type ceilings often seen in basements-
    http://shopping.msn.com/results/shp/?bCatID=4846,av=12-2087159

    They are found at most Home Depot type stores

    Here is the setup I use -excuse the horrid quicky pics:)( I usually put white paper underneath to hide the table/wall)-

    and the diffuser added-

    As you can see I went

    #61167
    Zach Matthews
    The Itinerant Angler

    Aha.

    #61168
    anonymous
    Member

    Hi

    The bulbs are generally available at your local photo store. The swing arm lamps came from Staples.

    The drawback of all this is, the lamps get hot!!!! and seem to work best if all connected to a power bar and turned off

Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.