Fishing rig

Blog Forums Fly Fishing Fishing rig

Viewing 14 posts - 1 through 14 (of 14 total)
  • Author
    Posts
  • #2755
    Avatar photoMark Schafer
    Member

    I have finally gotten tired of breaking down my rods at the end of the day. Now all I need is a kayak carrier for it.

    Should I go with a lift kit

    Mark..

    #22730
    jeff s
    Member

    I’d suggest welding a couple of the doors shut.

    #22731
    Rich Kovars
    Member

    I would  cut a hole through the trunk into the back seat too.  Make space for those 2-handers!

    #22732
    Avatar photoMark Schafer
    Member

    This thing came with a 60/40 rear seat that folds into the trunk. A 14′ rod will fit no problem using the trunk .I had four guys and three deer(four legged type) in it last weekend we got very weird looks at the check station…

    #22733
    Rick Marcum
    Member

    So, you were being serious?

    #22734

    Seeing a 6 door brings back many memories from my first job. I used to shuttle limos (stretch and 6 doors) for a funeral service company, but that was only after all the bodies were taken care of for the day. I hope yours has low miles like any good funeral vehicle should.

    #22735
    Avatar photoMark Schafer
    Member

    Really low miles Grant. You also have to fight the wheel when you pass a cemetery it just want to turn.

    #22736

    I thought this was a dumb hypothetical topic at first, but now I see you actually bought it.

    #22737
    jeff s
    Member

    I originally thought this post as just pulling our legs.

    #22738
    Avatar photoMark Schafer
    Member

    Gas mileage really sucks. Parking can be tough there has to be a real paved lot.
    I was thinking about the lift kit because we almost had it high centered last week.

    I’ve just had an epiphany…

    #22739

    Grant should we add a picture to the new site.

    Sounds like a good idea.

    What coach builder made your ride? My guess from a distance is a Superior, but I thought it might be a Federal or a Miller.

    Grant

    #22740

    Str8Steel (is that too many letters?)

    KromeKing?

    SLMPBSTR?

    DBLBNEE?

    GBSPimp?

    Prowler?

    YUK BUG?

    The possibilities are endless!

    What you need to do is partition the trunk leaving the one side for the two-handers, then install a refriderator in the other 1/2 or 2/3 of the trunk.  If you’re gonna roll in style and comfort, you might as well have cold beverages!

    By the way, I would like to commend you on this purchase and tell you this the the most ****ing brilliant idea I’ve seen in a while.  I will be following in your footsteps and only wish I had come up with the idea myself.

    #22741
    Avatar photoMark Schafer
    Member

    Regan,

    Thanks for the plate suggestions. At this point you have the only entry( PM me your address) and some great ideas, although… “GBSPimp” has me confused.

    I’m not sure how to hook up the fridge, but there is power to the rear HVAC system.

    How about an old hearse.

    str8stl

    #22742

    Oh GBS–> green butted skunk

Viewing 14 posts - 1 through 14 (of 14 total)
  • You must be logged in to reply to this topic.