Camera got damp

Blog Forums Photography Camera got damp

Viewing 15 posts - 1 through 15 (of 15 total)
  • Author
    Posts
  • #7657
    Anonymous
    Inactive

    Took some photos of a building project I am working on at home.

    #64194
    Rich Kovars
    Member

    Powering it on probably wasn’t a good move.

    #64195
    Zach Matthews
    The Itinerant Angler

    You aren’t even remotely screwed.

    #64196
    Anonymous
    Inactive

    Thanks…I am breathing a bit easier.

    I sort of assummed that but wasnt sure.

    #64197

    Like Zach, I have completely dunked my camera and its working perfectly fine today. I removed the battery and let it sit for a day in the sun, as much as possible. If you don’t have insurance, you should look into it! Its cheap and a great piece of mind.

    While on the topic has anyone used descant in a tupperware container to dry a camera?

    #64198
    andrew brown
    Member

    A quick way to get get it dry, other than setting it in the sun inside, is to crack your car windows and park the car and camera in the sun.  

    I took a swim a month ago and soaked my P&S and blackberry. I popped the batteries out as soon as I got out of the water, put them  back in my pack wet. After I got home I rinsed everything out with distilled water and let left it in my car on a 95 deg day.  

    Everything was working fine the next about 2 days later.

    #64199

    Zach, the bad news for your D200 is it may take a while for the problems to show up from a dunking..

    Though new cameras are a lot better than old ones for bomb proofness, they’re still not waterproof.

    www.dsaphoto.com

    A picture is thousand words that takes less than a second while a thousand words is a picture that takes a month.

    #64200
    Zach Matthews
    The Itinerant Angler

    I agree, David, but it has now been over 8 months.

    #64201

    It’s nice to see the good guys get lucky every once and a while ..

    www.dsaphoto.com

    A picture is thousand words that takes less than a second while a thousand words is a picture that takes a month.

    #64202
    Avatar photoChad Simcox
    Member

    Back before cameras were filled with electronics, you could put them in the oven for a few hours at a low temp to dry them out. I don’t know if I would do that with my DSLR (or even my 35mm SLR).

    http://society6.com/grainfarmer Fly Fishing and Landscape open edition Photography prints.

    http://grainfarmer.vsco.co/ iPhone photos
    http://instagram.com/chad_simcox Instagram

    #64203
    Rich Kovars
    Member

    I would throw it in a box with a bunch of desiccants before putting it in the oven.

    #64204
    andrew brown
    Member

    Back before cameras were filled with electronics, you could put them in the oven for a few hours at a low temp to dry them out. I don’t know if I would do that with my DSLR (or even my 35mm SLR).

    You can still do this, just turn it way down (125) and leave the door open…

    #64205
    Zach Matthews
    The Itinerant Angler

    I think you run the risk of warping the light plastic parts even at that low a temp.

    #64206
    Avatar photoChad Simcox
    Member

    The technique Andrew mentioned is the one I was refering to. But I still don’t think I would do it for the reasons others have mentioned.

    http://society6.com/grainfarmer Fly Fishing and Landscape open edition Photography prints.

    http://grainfarmer.vsco.co/ iPhone photos
    http://instagram.com/chad_simcox Instagram

    #64207
    Anonymous
    Inactive

    Update:

    Put everything back together this morning and it seems to be in working order.

Viewing 15 posts - 1 through 15 (of 15 total)
  • You must be logged in to reply to this topic.